There are several companies out there that are more than happy to take your cash, claiming that they make your home more energy-efficient or sustainable. You can spend a whole lot of money with very little to show for it in terms of energy savings, if you are not careful.Do you want to learn more? check this link right here now
To increase the energy efficiency of your homes, I suggest three simple measures.
Repair. Conservation is not something at the top of our list as Americans, but it IS the least costly to enforce, and is of course free. A big impact can be created by shutting off lights, unplugging unused appliances, turning off the TV and turning down the thermostat. Get one if you don’t have a set-back thermostat. If a set back thermostat is in your possession, use it. Make sure that you do not have the set back set at 70 degrees on “hold”, it defeats the intent.
Bills for water and sewer are not getting any cheaper either. The sad thing is that whatever domestic water you use even though you may be watering the yard, you pay for an equivalent amount of sewage. A very easy and inexpensive upgrade is to instal aerators in your showers and sinks to limit water flow. In the worst case scenario, the shower heads or faucets can need to be upgraded, but these things are reasonably cheap. This is a given, but make sure that the bathrooms do not run either.
Replace and discard light bulbs or replace obsolete appliances. I replaced every light bulb in our house with compact fluorescent light bulbs a couple of years ago. With only a few lights in each room, they weren’t like normal people. We had something like 40 recessed lights and every lamp in town was owned by my wife (past tense). It cost us $660.00 for every light bulb to repair. I tracked our energy use every month after the change over and surprisingly, ten months later, we broke down even on the initial cost of the light bulbs. That’s less than a year’s pay back, and not bad!
If the budget allows, look at enhancing the envelope of your house. By enhancing the exterior envelope of your house, one of the best places to start is. The external walls, windows and doors, the foundation and the roof/attic are included. Installing solar panels, geothermal systems, wind turbines or even a tankless water heater doesn’t make any sense if the energy transformed into heat or air conditioning escapes easily from the building. I am not opposed to these products, but usually, the lower hanging fruit is not a new HVAC device.
Start with your home’s first caulking and weather stripping. Air penetration will increase your annual energy bills dramatically. Caulking and weather stripping are frequently ignored in older homes and are one of the lowest hanging fruits in terms of cost improvement versus energy savings.
If your house is well-caulked, your attic is the next place to look. It is fairly inexpensive to add fibreglass insulation to the attic and also a fairly fast return. Of course, the older the home, the greater the importance of these things.
Finally, consider improving the insulation of your windows and exterior wall. This is definitely a much greater expenditure. Adding storm windows is not a bad idea if you are unable to afford new windows.